ITI Welder Trade Introduction And Safety Precaution Important Question
ITI Welder Trade Chapter 1 Introduction And Safety Precaution Important Question
ITI Welder Trade Introduction And Safety Precaution Important Question: Trade Introduction And Safety Precaution Test Series is important for All Welder Trade Competitive Exam BARC, NPCIL, CITS, UPRVUNL TG2, RRB Assistant Loco Pilot, Indian Ordnance Factory (IOF), Maintainer (DMRC, LMRC, NMRC, BMRC, JMRC), ISRO Technician, CRPF Constable Tradesman, CRPF Overseer, HAL Fitter, MES Fitter, VIZAAG Steel Fitter, SAIL, GAIL, BHEL, NTPC, Oil India Limited, ONGC, DFCCIL, MAZAGON DOCK Ltd. and Other Technician Exams.
ITI Welder Trade Test Series Overview
आईटीआई वेल्डर ट्रेड छात्रों के लिए विभिन्न कॉम्पिटेटिव एक्जाम से क्वेश्चन को लेकर टेस्ट सीरीज में शामिल किया गया है यदि आप टेस्ट सीरीज ज्वाइन करते हैं तो आपको टॉपिक वाइज सभी प्रीवियस ईयर के क्वेश्चन मिल जाएंगे तथा साथ में आप इसके पीडीएफ भी डाउनलोड कर पाएंगे इसका ओवरव्यू नीचे दिया गया है यह टेस्ट सीरीज आपको इंग्लिश और हिंदी दोनों लैंग्वेज में अवेलेबल है
Questions from various competitive exams for ITI welder trade students have been included in the test series. If you join the test series, you will get topic wise questions of all the previous years and you will also be able to download its PDF. Its overview is given below. This test series is available to you in both English and Hindi languages.
| Number Of Questions | 50 In Each Test |
| Duration | 60 Minutes |
| Language | English And Hindi |
ITI Welder Trade Introduction And Safety Precaution Important Question
Q:1 किसी दुर्घटना की स्थिति में पीड़ित व्यक्ति को-/ In case of an accident, the victim must-
BHEL (Technician-B) 2018
- आराम करने के लिए कहना चाहिए / should tell to rest
- दुर्घटना के बारे में पूछताछ करनी चाहिए / should inquire about the accident
- तुरन्त प्राथमिक उपचार प्रदान करना चाहिए / First aid should be provided immediately
- कित्सक के आने तक लिटा देना चाहिए / should be kept lying down until the doctor arrives
Solution: In case of any accident, first aid should be provided to the victim immediately. First aid is given according to the condition of the injured person. In case of injury, arrangements should be made to call a doctor. If there is a delay in the doctor’s arrival, the person should provide first aid.
Q:2 वेल्डिंग शॉप में आग लगने का कारण हो सकता है| / The reason for fire in welding shop can be-
R.R.B. Bilaspur ALP 15.07.2012
- गर्म स्लैग / hot slag
- इलेक्ट्रिक आर्क / electric arc
- Both Above
- इनमें से कोई नहीं / none of these
Solution: Fire in the welding shop is caused by hot slag and electric arc. Along with this, fire can occur due to open flame, metal, spark or splashed hot metal in the welding shop. Sometimes fire can occur due to electrical short circuit in factories. Fire can also occur due to leakage of fuel gas or acetylene gas.
Q3: मानवीय शरीर का अवरोध (resistance) लगभग …….होता है। / The resistance of the human body is approximately……..
SAIL Bokaro Steel Plant (ACT) 2016
- 600 ohm
- 700 ohm
- 800 ohm
- 900 ohm
Solution: The resistance of the human body is approximately 600 ohms. And a current of more than 0.1 ampere can destroy it. Thus any source more than 60 volts will give more than 0.1 ampere of current. Therefore, when earthing a voltage of more than 60 volts, it is mandatory to follow all electrical safety rules.
Q4: निम्न में कितने वोल्ट से अधिक वोल्टता का अर्थ करने पर विद्युत सम्बन्धी सभी सुरक्षा नियमों का पालन करना अनिवार्य है?
It is mandatory to follow all electrical safety rules if the voltage is more than how many volts?
- 80 volts
- 60 volts
- 20 volts
- 40 volts
Solution: If the voltage is more than 60 volts, it is mandatory to follow all the electrical safety rules. For this, the following things should be kept in mind.
(1) Welding equipment should be properly earthed.
(ii) The insulation of wires should be of the proper type.
(iii) Electric holders are completely bad conductors of heat.
Must be made of dielectric material.
Q5: वेल्डर थ्योरी ट्रेड की प्रशिक्षण अवधि होती है/ The training period for welder theory trade is-
- 6 months
- 1 Years
- 2 Years
- 4 Years
Solution: Training period for welder theory. It is a year. Welder trade under CTS is one of the popular courses being run across PAN India through ITI. This course is of one year (two semesters) duration. This mainly includes trade and core areas. After passing the training program, the trainee is awarded a National Trade Certificate (NTC) by the internationally recognized NCVT.
Q6: प्रशिक्षण संस्थानों द्वारा प्रशिक्षुओं को दी जाने वाली सुविधा है- The facilities provided to the trainees by the training institutes are-
- पुस्तकालय / Library
- छात्रावास / Hostel
- चिकित्सा / Treatment
- ये सभी / all these
Solution: Training institutes provide facilities like library, hostel, medical etc. to the trainees. Laboratory facilities are also provided to the trainees in training institutes. All laboratories are provided with facilities for many machines and tools to perform experiments.
Q7: आर्क से उत्पन्न पराबैंगनी किरणें वातावरण की……..को ओजोन में परिवर्तित करती हैं।
The ultraviolet rays produced by the arc convert atmospheric ozone into ozone.
- Hydrogen
- Oxygen
- Nitrogen
- कार्बन डाइ-ऑक्साइड
Solution: The ultraviolet rays produced by the arc convert oxygen in the atmosphere into ozone. The welding arc emits harmful ultraviolet and infrared rays. Ultraviolet rays cause harm to eyes and skin diseases. Therefore, appropriate type of filter should be used for protection from ultraviolet and infrared rays.
Q8: फ्यूम तथा विषैली गैसों को बाहर निकालने के लिए निम्न में से किसका प्रयोग किया जाता है?
Which of the following is used to expel fumes and poisonous gases?
SAIL Durgapur Steel Plant (ACT) 05.09.2014
- फ्यूम नॉजल / fume nozzle
- फ्यूम एक्स्ट्रेक्टर/ fume extractor
- फ्यूम कैप / fume cap
- इनमें से कोई नहीं / none of these
Solution: A foam extractor is used to remove fumes and poisonous gases. During the welding process, the welder keeps breathing various types of toxic gases and contaminated dusty air produced by welding, which hurts the health of the welder.
Q9: अनियन्त्रित व दुःखद परिणाम वाले अनजाने में हुए प्रकरण को क्या कहते हैं?
What is an incident that happens unknowingly and has uncontrolled and tragic consequences called?
- दुर्घटना / Accident
- घटना / Event
- (a) और (c) दोनों / Both (a) and (c)
- इनमें से कोई नहीं / none of these
Solution: An incident that happens unknowingly and has uncontrolled and tragic consequences is called an accident. In factories, work continues continuously on different types of machines. Artisans move quickly from one place to another for work. Oil remains lying somewhere at the work site. Therefore, every artisan should have complete knowledge of the safety equipment available in the factory.
Q:10 मानव स्वभाव में बसी विशिष्ट स्वभाव क्या है?/What is the special nature inherent in human nature?
R.R.B. Bhopal ALP 06.06.2010
- जिज्ञासा / Curiosity
- कर्मठता / Hard work
- ज्ञात नहीं / not known
- इनमें से कोई नहीं / none of these
Solution: Curiosity is a special characteristic of human nature. But the artisans working in factories have to put restrictions on this. Because a person with excessive curiosity quickly becomes a victim of an accident.
Join Full Test Chapter 1 Introduction And Safety Precaution Important Question: Click Here
ITI Welder Trade Introduction And Safety Precaution Important Question
| Join Telegram Group: | Click Here |
| Join WhatsApp Group: | Click Here |
| More Government Jobs | Click Here |
